Ask Experts Questions for FREE Help !
Ask
    Blueoctober_712's Avatar
    Blueoctober_712 Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 21, 2010, 07:58 AM
    Air handler blower motor
    At night I run just the fan motor with no climate control. I do this because the white noise of the compressor drowns some of the noise out from my inconsiderate neighbor upstairs. Will I be consuming a lot of energy? Does this run off 220? I don't want a huge bill at the end of the month but until I can get this problem resolved I want to sleep as well. Thank you very much.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Mar 21, 2010, 09:28 AM
    If you are just running the blower, the compressor isn't coming on. As to whether it is 220 (240), is this a conventional furnace or heat pump? Usually furnaces have 120v blower motors, and heat pumps (with a few exceptions) are 240v
    Blueoctober_712's Avatar
    Blueoctober_712 Posts: 3, Reputation: 1
    New Member
     
    #3

    Mar 21, 2010, 02:43 PM

    Thank you very much for your answer. Actually its central AC. I live in Florida so I don't need to use it right know so I just set the fan on without either the AC or heat setting. I just want to know if this is using a lot of electricity. When I run it as climate control it definitely uses some power
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #4

    Mar 21, 2010, 04:23 PM

    Probably pulling about 5 to 7 amps
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #5

    Mar 21, 2010, 05:26 PM
    You are welcome. Running the blower continuously isn't a bad idea for comfort either. It tends ot even out temperature throughout the house. Also when cooling, leaving the blower on helps with dehumidification. Your electric bill will let you know if it's worth running to cancel the noise. I know many people who sleep with a fan for the white noise... myself included.
    Blueoctober_712's Avatar
    Blueoctober_712 Posts: 3, Reputation: 1
    New Member
     
    #6

    Mar 22, 2010, 03:24 PM

    5 to 7 amps isn't really that much right?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #7

    Mar 22, 2010, 03:39 PM

    At 6A at 120 V, running continuously 24 hrs a day and paying about 0.12/kwh is about $1.78/day

    (6 A*120 V)/1000*24*0.12 = cost/day

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air handler blower relay [ 0 Answers ]

The blower on my air handler will not turn off, And the thermostat is turned off at the thermostat. Any ideas Thanks Dusty

Air handler blower inoperative [ 1 Answers ]

Hello,I have a heil furnace.the blower motor in the air handler is not working.I have checked for power to the motor,and believe I have no power to it.I checked for power from the cutoff switch to the relay and have power to the relay,but no power from the relay to the motor.

Air Handler blower won't [ 10 Answers ]

I have a 3 1/2 year new AMANA GUIV070FX40 attic mounted system that is the furnace / air handler for an AMANA RCE42C2A condenser / compressor. The entire system, including new ducting and separate electrical circuits (220 for the compressor / 110 for the air handler) was installed by a credible /...

Air Handler Blower [ 2 Answers ]

One of the 3 brackets that attaches the fan motor to the blower housing on my inside a/c unit has broken, causing the motor to tilt to one side. I pulled the blower and tie-wired the motor to the housing and it seems to be holding. Hopefully this will last a few days. I could adapt a...

Blower/Air Handler motor noise. Loud humming. [ 2 Answers ]

We have ~ 1991 Carrier 58sx high efficiency condensing furnace and central AC. Now the air handler is making a loud humming/vibration noise when the fan kicks in (the blower motor for the air handler makes the noise, not the gas furnace/exhaust blower). The serious electrical humm is loudest when...


View more questions Search