Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Emergen 10-12k 50 amp switch to L14-30 twist lock
[ 6 Answers ]
Hi there I have a Briggs generator with the standard 30 amp twist lock output and have purchased a Emergen 10-12k switch that has a 50 Amp 3 prong twist input. Question how to I make a cable for this to connect between the two units. I know you use a 10/4 cable if it were a 30 amp but I don't...
Change 220v plug to 110v plug without harming appliance?
[ 4 Answers ]
Can we cut off the 220v plug and connect a 110v plug and not harm the appliance? Or is there a plug converter available?
How to connect a transfer switch using L14-20 to generator with L5-30 socket?
[ 25 Answers ]
Years ago an electrician wired in a transfer switch that has an L14-20 connector on its face, and ran a heavy cord from there to the garage where the cord also terminates in an L14-20 plug (male). My old contractors generator had a socket connection for L14-20, but I'm looking to replace it...
Can I plug my electric oven into a normal plug socket?
[ 2 Answers ]
Can I plug my electric single oven into a normal plug socket?
12-3 wiring from gfi plug to outlet to plug in a 110v pool pump
[ 5 Answers ]
Need to verify proper wiring for above 110v pool pump. View more questions Search
|