Ask Experts Questions for FREE Help !
Ask
    black67camaro's Avatar
    black67camaro Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 16, 2010, 04:49 PM
    Hot water pressure
    My hot water runs fine for a while(kitchen sink), Then the pressure will drop and I can hear the pipes vibrate. If I go into the bathroom and turn on the hot water for a minute and then turn it off the pressure will return to my kitchen sink. Its like a vacum builds up in the pipes and has to be released or something. How do I solve this?

Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

Hot Water Heater - Low pressure only on Hot Water side [ 7 Answers ]

My hot water starts with full pressure then quickly reduces flow to trickle at all household faucets. Already flushed water heater twice. Flow comes back temporarily once tank refills, then peters out again. No muck or discoloration in water. Cold water side has full pressure (even when Hot water...

Does the pressure from the hot water tank effect the pressure of the cold water? [ 2 Answers ]

We have very low water pressure at our kitchen sink from both the cold and hot water faucets, but no problem with the water pressure to the bathroom or washer. The cold water tank is closest to the kitchen and the hot water heater is near the bathroom and washer. Someone told my roommate that there...

I have very low hot water pressure from my hot water heafrom an electric water heater [ 0 Answers ]

I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?

Does is matter which hot water heater I buy to get mazimize hot water pressure? [ 8 Answers ]

Need advice in choosing new hot water heater to maximize hot water pressure. Plumber installed new intake/&out copper pipes, new coldwater cut off valve, new line to humidifer, correctly switched hot and cold lines to water heater, flushed - and still hot water pressure is low all over the house....


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.