Ask Experts Questions for FREE Help !
Ask
    Gephill's Avatar
    Gephill Posts: 31, Reputation: 1
    Junior Member
    		  
    #1

    Mar 15, 2010, 12:19 PM
    Changing oil sending unit
    I feel stupid asking this but attempting to get the old unit out out of a 1998 Dodge dokota I can not get the wire disconnectd. It appears to have some type of clip holding it on. I am afraid I will break it if I put too much pressure on it. Is there a trick to getting it loose. Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 15, 2010, 04:09 PM

    There shouldn't be any trick to it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kawasaki spectre.fuel sending unit [ 2 Answers ]

I havea 1982 Kawasaki Spectre 750N. I rebuilt the fuel petcock with a kit from cheapcycleparts.com but now the fuel sending unit is leaking,cheapcycleparts does not carry it,any ideas where I can find one? I'm thinking of just bolting a plate over the opening for the sending unit with a gasket and...

How to locate and check oil pressure sending unit on 2006 kia rio [ 1 Answers ]

How to locate and check oil pressure sending unit on a 2006 kia rio

Sending unit wires [ 1 Answers ]

I have a 72 gmc pickup truck,and I can't locate the wire that goes to the fuel gauge and connects to the sending unit ,can anyone out there help me with this problem Thank you

Heating unit is sending cold air [ 1 Answers ]

Hello, I have a Trane Model TWE065E130A1 that is currently blowing out cold air, when in Heat mode. In addition, my outside unit seems to run continuously. At night, I have heard the airhandler unit constantly clicking on an off... Could my problem be the Heat Strips? Tom in Texas

1992 Chevy S-10 oil sending unit [ 1 Answers ]

Where is the oil sending unit on a 1992 Chevy S-10 2.8 Liter?

View more questions Search