Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing bypass shower doors and the shwer walls aren't plumb so doors have gaps
[ 2 Answers ]
Cannot adjust shower doors to align correctly because shower walls aren't plumb... the shower bypass doors/rails etc are level and plumb but they leave gaps because the wall of the shower isn't plumb... any way to correct that enough to align the doors? Out of plumb appx 1/8 " on both sides. ...
Installing bypass shower doors and the shwer walls aren't plumb so doors have gaps
[ 0 Answers ]
Cannot adjust shower doors to align correctly because shower walls aren't plumb... the shower bypass doors are level and plumb but they leave gaps because the wall of the shower isn't plumb... any way to correct that enough to align the doors? Out of plumb appx 1/8 " on both sides.
Overhead doors cold weather
[ 1 Answers ]
We have a Craftsman screw drive unit and the minute the weather turns cold, the door only opens a few feet and we need to continually open and close it from the inside switch to finally get it opened completely. Has anyone experienced this problem with the "screw drive" unit and what did you do to...
Replacing bedroom hollow doors with 6 panel pine doors.
[ 4 Answers ]
I am replacing my bedroom hollow doors with 6 panel pine doors. My problem is that the 6 panel pine doors are not fitting properly. When I hung one door with the same size hinges I was able to put the screws in the same holes as the old ones but the door will not close. The new door is about...
Weather stripping for round-top door
[ 1 Answers ]
Can anyone recommend what kind of weather stripping to use to seal a round-top exterior door? I've seen weather stripping for doors with straight lines. Can't seem to find anything that might work for a round door. Thank you. View more questions Search
|