Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Composite deck cleaning
[ 3 Answers ]
I replaced traditional treated lumber decking with the newer composite (trex) boards. I have found this material extremely hard to clean. It shows rain water stains and seems to absorb dirt and stains of all sorts. Please let me know if you have any cleaning solutions! I have tried everything-even...
Howling Composite Deck
[ 2 Answers ]
I have a customer who built a deck on the back of his house. The deck is about 8 feet off the ground. The house sits up on a hill and gets a fair amount of wind. The problem is that when the wind hits the side of the house it is forced up underneath the deck and blows upward. The result is what I...
Wood deck over broken, uneven concrete patio
[ 2 Answers ]
I have a broken and uneven concrete patio - I don't want to remove it - I want to cover it with a wood deck... it is fairly stable - can I just put in small posts and level it and use it as a base for the new patio ?
Pouring Concrete Slap over Concrete piers
[ 1 Answers ]
I drew a fairly detailed drawing of the slab that I wanted, with the piers (flagpole support piers, with pipes down to put poles into) shown so they could do it all in one pour. Well, I guess our general contractor cannot read the drawings because all I got were the piers with the metal in them. ...
Wood Deck over Concrete Patio
[ 2 Answers ]
I would like to build a deck over my concrete patio but the problem is I have only about 4 1/2 inches between between slab and top of concrete house slab. Therefore, I can only use 2x4s for supporting the low profile deck. All deck do it yourself books recommend a minimum 2x6 for deck joists. Is... View more questions Search
|