Ask Experts Questions for FREE Help !
Ask
    bigmar's Avatar
    bigmar Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 10, 2010, 08:01 PM
    Old ceiling light wires no box
    I removed a very old surface mount ceiling light. To my surprise just two wires coming directly from the plaster ceiling ,with no box or ground. The house is appx. 85 years old,is it safe to just connect a new fixture with the 2 wires and replace fixture to plaster again?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 10, 2010, 08:04 PM

    This home probably was built with no electrical and it was added later, apparently before some codes were adopted by your city. You could just replace it as is, maybe you are grandfathered over any codes. I'd cut some plaster and install a fixture box. Unless you plan to pull new cable forget about the ground.
    bigmar's Avatar
    bigmar Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 10, 2010, 08:13 PM

    OK thanks I really didn't want to start breaking the plaster and lath underneath,
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Mar 10, 2010, 08:46 PM

    Suggest that you might want to consider using a 1/2" deep, surface mounted "pan cake" box.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling electrical box only has red and black wires (no white or ground) [ 12 Answers ]

The ceiling electrical box in my kids bedroom only has a single red and single black wire, but nothing else (no white wire, no bare copper ground wire, not even a grounding nut). I bought a ceiling light fixture which has the standard black, white and copper wires (hot, neutral, ground), but I've...

3 black wires, one white in light box [ 22 Answers ]

3 black wires are twisted together and connected to the blue and black on the old ceiling fan. The one white is connected to the one white on the fan. Have tried connecting these wires many different ways for a new remote controlled fan but no luck . This is a very old house with old wiring (I have...

How to wire a new ceiling fixture in an old box with four wires [ 3 Answers ]

Hello all, I have a home built in the 1950s and am trying to change a simple ceiling fixture. My husband disconnected the old fixture from the ceiling, but neglected to see how it was connected. :o my question is this: I'm trying to hook up a new fixture with just one black, one white and one...

Ceiling box has 2 sets of wires [ 2 Answers ]

I am trying to install a ceiling light to an existing ceiling box. I found two sets of wires, two black and two white in the ceiling box. I believe that this ceiling box is operated by a dimmer switch (just bought house and light was not installed). How do I wire the light?

Ceiling light wires [ 1 Answers ]

Hi there folks. Wonder if someone can help me out here. I have taken an old ceiling light down and when I was unscrewing the wires on the old light I didn't check which wire was where. I am now left with 3 grey cables each containing a green, red and black wire. I thought that I just had to screw...

View more questions Search