Ask Experts Questions for FREE Help !
Ask
    tazzh's Avatar
    tazzh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 10, 2010, 02:02 PM
    Wireing a furnace fan motor
    I have an older furnce, standing pilot type, and want to wire the fan so I can distribute the heat generated from our wood burning stove through the house using the furnace fan. I know I run a wire from the "G" terminal on the wall thermostat to the furnace, but where do I connect it to on furnace? I cannot find a relay of any type in the furnace.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 10, 2010, 03:09 PM
    All I have
    Attached Images
  1. File Type: pdf AD%20ON%20FURNACE%20BLOWER%20WIRING.pdf (50.3 KB, 148 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace fan motor overheating [ 9 Answers ]

I recently replaced my entire air conditioning system. The furnace was fine so I kept it from the trash heap. I removed the fan assembly from the housing. My extension is to build a "blower box" to blow ambient air. Not sure what we're going to do with it, but it was fun for the kids to learn...

Noisy AC - Furnace fan motor [ 1 Answers ]

The fan starts making noise... then, all of a sudden, the noise is reduced to a loud hum. The unit is typical of a residential home heating and ac unit. Split system for cooling and gas for heating. Not a heat pump.

Winchester Furnace Fan Motor [ 2 Answers ]

I Am trying to find a Winchester Furnace fan motor to purchase.. Does anyone have a used or new or know where I can buy? Live in COLORADO and it is cold with NO furnace.. Model PCUHCLD16N115C

Furnace Fan Motor not turning ON [ 3 Answers ]

Hi, The fan motor connected to my furnace blower (via a belt) is no longer turning ON reliably. I can hear the call for the motor to turn ON, but the mottor just "humms" then turns OFF. Then the cycle repeats itself. If I manually push the motor pulley during the "humm" then the motor...

View more questions Search