 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to understand the installation procedures for installing a remote control into a Hampton Bay (Mod. 197 878) Grammercy Fan. The reomote receiver has a total of 6 wires. One is the antenna wire, and that speaks for itself. There are black, white and blue wires on one side, and I...
I just installed a HB ceiling fan with light package and purchased a separate remote controller. The fan portion seems to work fine and responds to the remote, but the light is not. The light will only come on very dim, like there is very little power getting to it. If I only run one bulb, it is a...
Hi, I just purchased a hampton bay remote for my hampton bay ceiling fan. I've been searching everywhere for the answer but no luck. The remote has a black, white, and blue on one side, and on the other side it has a black and a white wire. The only wires coming from my ceiling is a black, white,...
Hi, I'm the "proud" owner of a Southwind V ceiling fan. I'm a pretty cautious person by nature so when I installed the ceiling fan I left out the optional remote controller piece to make sure all works well. Blue and black fan wires to the black wire in the wirebox, and white on white (grounds...
I've just installed a Hampton Bay Reddington IV ceiling fan, and I'm not sure about the directions to install the wireless remote. The remote has five wires coming out of it. 2 white (AC IN N, MOTOR N), 2 black (AC IN L, MOTOR L) and 1 blue (FOR LIGHT). However, I've only got 3 wires coming out...
View more questions Search
|
