Ask Experts Questions for FREE Help !
Ask
    dodgehoff's Avatar
    dodgehoff Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2006, 05:31 PM
    More Help Needed On 1996 Gmc Pickup, V6 With Vortek Engine
    The distributor is removed, timing chain and sprockets removed, and the motor has been turned over. I'm now ready to align everything to include how I align the balancer shaft sprocket with the cam shaft sprocket. Upon lining that up, I install my timing chain and cam gear - I need instructions on how to or the location of all of the dots on the balancer shaft gears and timing chain gear and crank shaft gear should be aligned.:confused:
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Nov 29, 2006, 06:37 PM
    I recommend you consult a Chilton's or Haynes Manual for that specific information.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Timing in 1196 GMC pick up V6 vortek engine [ 1 Answers ]

TXgreasemonkey gave me an answer (thanks) but I'm still have problems. I'm lining up the timing chain sprocket and crank shaft sprocket. The are lined up dot to dot - the timing chain is at 6:00 and the crank shaft is at 12:00. The #1 piston is at top dead center. When I install the...

Timing on 1996 MGC pick up V6 with vortek engine [ 1 Answers ]

I replaced the heads in my pick up and I've been trying to set up the timing chain with the balance shaft gears and distributor and my truck still will not start. I believe my problem is getting the distributor lined up - I'd appreciate any help I can get. I've spent hours working on this. ...

Check Engine Light Comes On On My Honda Accord 1996 [ 1 Answers ]

What Could Be The Reason Why My Check Engine Light Comes On, Also How Often Do I Need To Change The Oil, Tires?

Gmc pickup [ 1 Answers ]

I own a 1982 gmc 1/2 ton pick up. The transision will not shift out of low gear. When you hit around 15 or 20mph and shout off the gas it is like it goes in to nuturl. Years ago when this hapend I changed the "vacum modulator" and I would be off again. I looked EVERY WARE on the...

View more questions Search