 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Refrigerator water line
My friend R&R the bad valve that prevented the water from reaching both ice & water dispenser (Refrigerator is at vacant rental unit) The line froze, he has cleared it. He said keep the temp low until it has food in it? & I should have no more problems? Does this sound right to you? THX in advance.
|
||||
Check out some similar questions!
I have a GE Profile refrigerator model TFH30PR that developed a leak. The water line within the refrigerator that leads to the water dispenser developed a crack at the very beginning where it was connected to the inlet line I presume after a dual solenoid valve. I cut the cracked tubing off and...
Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...
When I turn off my kitchen faucet, my refrigerator water line makes a tap, tap, tap noise. Have taped the excess water line to the back of the refrigerator. This noise only occurs when I trun my kitchen faucet on and off. Your thoughts?
The line to my water dispenser started to leak so I need to replace the whole line. Most of the line is 1/4" the part that I need to replace is 3/16'. I have tried to find this line and none of the plumbing stores carry it and they tell me it is an odd size. Does anybody know where I can get...
I have a GE Profile refrigerator, and the manual is very vague about how to connect the water supply line to it. There is ¼" OD copper tubing coming from the back of the fridge (about 3"), and I have the supply line (¼" OD copper tubing w/ about 48" extra coiled up) coming from the basement. How do...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
