 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Ty for having this site-it is very helpful-my question is I called a service tech my fuse 5 amp kept blowing-he said the reversing valve and the board were bad-how could I have checked this myself-it is a payne ac unit-he said he had to disconnect low voltage to condensing unit in order to get the...
Have ac unit which has a 5amp fuse between the transformer and the thermostat-i turn the thermostat to fan and it blows air-but when I turn the heat or ac on it blows the fuse everytime-replaced capacitor and contactor on outside unit and still doing the same.
I have an HK42FZ004 cercuit board. The fuse started blowing every so often after I resoldered two resistors with cracked solders. The fuse noe blows as soon as I replace it and turn on the power. I cannot figure out where the problem is. Please help
We have an 8 yr old Miller 5 ton 13 SEER AC unit, just about two weeks ago it blew one of the two 45amp fuses that are located between the unit and the house, we replaced the fuses and now it is blowing a fuse every couple of days. What are the possible causes?
I am not sure what is happening, We have two units the upstairs is running just fine. Now the downstairs keep blowing the fuse in the furnace. What it does is that it will let the fan run but when I reduce the temp. so the a/c will come on it blow the fuse. Thanks, George
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
