Ask Experts Questions for FREE Help !
Ask
    heimstaedt's Avatar
    heimstaedt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2006, 12:27 PM
    No hot water pressure
    Hey, we replaced the flex tube on our water heater that goes from the recirculating pump to a valve which appears to go to the rest of the house. Now we have no hot water pressure! What did we do wrong?
    vision's Avatar
    vision Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 29, 2006, 02:13 PM
    Quote Originally Posted by heimstaedt
    Hey, we replaced the flex tube on our water heater that goes from the recirculating pump to a valve which appears to go to the rest of the house. Now we have no hot water pressure! What did we do wrong?
    Is this a closed loop hot water boiler?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Nov 29, 2006, 04:37 PM
    What pipe is the valve connected to and where's the flex tube connected to? Why didn't you reconnect the same way it came apart. Please explain your problem in more detail. Thanks, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Increase Hot Water Pressure w/Water pump? [ 3 Answers ]

Would a Watts Premier Hot Water Recirculation Pump (http://www.costco.com/Browse/Product.aspx?prodid=11026121&whse=BC&topnav=&cat=&s=1) (or any other brand name) help to increase hot water pressure if you install it directly to the hot water output pipe and then turn it on ONLY while taking a...

No hot water pressure [ 1 Answers ]

Very little water coming out of tub faucet what could be causing this:confused:

No pressure hot water [ 5 Answers ]

Hello, I have a hot water issue. When turned on at a single faucet hot water is fine. As soon as another tap is turned on or the washer or a shower is turned on loss of pressure everywhere. Cold pressure is good. I just checked it and it is at 38psi for a 400/60 downdrop. No let off in cold...

No Hot Water Pressure anywhere [ 6 Answers ]

I have very little hot water pressure throughout the house, both bathrooms (shower and sinks), and the kitchen as well. Have already drained and flushed the water heater tank. Can I use air to flush pipes? I would first remove lines from water heater then remove all heads from showers and faucets...

Low water pressure, too much hot water [ 1 Answers ]

Changed water filter approximately 2 weeks ago. Since then, we've had reduced water pressure at kitchen faucet and in shower. I've also noticed there's too much hot water in the shower (I have to turn the cold water almost completely off to get a comfortable temp, which explains the low flow BUT...

View more questions Search