Ask Experts Questions for FREE Help !
Ask
    vision's Avatar
    vision Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2006, 12:05 PM
    Hampton Bay Fan
    Looking to get the pinout configuation for the remote speed control on a Brookedale ceiling fan. I am looking to hard wire the speed and light control?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Nov 29, 2006, 03:05 PM
    Pinout?

    I'm sorry to say that if the fan is remoted controlled, and does not also have pullchains, it is unlikely you will be able to hard-wire controls for it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Fan Light/Fan Remote Problem [ 16 Answers ]

Hello, we have a Hampton Bay fan and my son dropped the remote and it stopped working. I changed the batteries and that didn't work. Now I asked someone at Home Depot what I needed to do. They instructed me to buy a new remote kit... I did however it came with a little grey box with 3 cords...

View more questions Search