 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I installed engineered hardwood floors in my living room in the instructions it said to put polyurethane on the floor when finished so that's what I did but now some spots on the floor are spotty and some are smooth and shiny what should I do. How can I take the polyurethane off the floor.
I have a floating engineered wood floor in a hallway. One corner of one wood board has popped up (since there is no edge groove at that point of the board). I wonder if I should try to glue the corner of the board or use some other mean to fix it. What type of glue would you recommend?
We had some cermic tiles lift after the earthquake last October and we are now planning to take up the rest of the tiles and replace them with an engineered Bamboo Flooring. What do we need to do to get the floor ready for the wood? Do we have to get all the mastic up and if we do what can we...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
