 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier furnace diagram
Unit runs but ingnition will not light. The gas company came and took front panel off on the circular window I can see a light that blinks three quick blinks intermittingly is sorry to sound so stupid, but is that what they mean ignitor
|
||||
|
||||
|
I'm not sure I included in my question that the unit runs, but does not blow hot air,
I have a carrier 9300 the unit was running but stopped blowing hot air. I took of the front panel and in the small round window a sensor light blinks three or four times at start up. The gas company suggested I look into a ignition, but I don't know where the ignition is. Im in dire straights, anyone have any answers. Thank you for any info you can give me
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
No transformer 24v. Lost track of wiring,sample;wiring going for heat section, wiring for cooling section, wiring for fan section. This unit is not using circuit board.the tranformer just has two wires red and something to produce 24v.how would you connect together.
I'm looking for a wiring diagram for Carrier Furnace Model 58GS100CGA, 160 Series, 76,000 BTU's. BC Furnace has replaced everything in my furnace & it's still not working. I've called in another repair man & he has checked everything & now says he needs to check the wiring from start to finish...
Were ca I find a diagram for a carrier condenser mod # 38TRA036331 thank you
I just replace the relay for the heater and fan . I have acarrier unit but now the elements will turn on when the thermostat is off. The fan will not work with auto position please advice if u have adiagram to see if its wire wrong,, thanks
View more questions Search
|
