Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pump pressure switch does not turn on with low pressure
[ 0 Answers ]
I lost water in my home overnight. The pressure gage reads about 8 PSI. If I use the lever on the pressure switch to close the contacts, nothing happens. Actually, the pump controller box, makes a buzzing sound for a couple of seconds, but that's it. Does anyone have any thoughts? I don't...
What is the correct suction pressure and head pressure for a 3 ton tempstar heat pump
[ 1 Answers ]
When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is freezing the compressor, accumulator tank and all the lines soild ice.
Grundfos pump on demand electricity usage
[ 1 Answers ]
I swithched from a grundfos pump on demand to a jet pump / pressure tank system thinking I would save electricity since the grundfos starts up every time water is called for. Does anyone know if I did the right thing or if I wasted my time and money?
How does the electricity on an ejector sewage pump work?
[ 1 Answers ]
Does the electricity cycle on and pump the waste out automatically after a set number of flushes? At a specific time interval?Thanks!
High well pump pressure, but low pressure in house
[ 6 Answers ]
I have a 2 year old renovated home with a well. Pressure was never really great in the house, but acceptable. The well and line to the house is about 40 years old. Inside the house is a 2 yr old Amtrol xtrol pressure tank, which feeds a 2 yr old water softening system, which feeds a whole-house... View more questions Search
|