Wiring broan fan light nightlight to multi switch

1max1 Posts: 4, Reputation: 1

New Member

Mar 3, 2010, 12:53 PM

Wiring broan fan light nightlight to multi switch

I am looking at a broan light fan and night light diagram to a muti use switch, with power at the switch. My power is at the housing. What wiring changing are needed? Secondly, I would like two locations for the on and off. The second part may not be possible. I would settle for a single muti switch for the fan and night light and a three way switch at two locations for the light. I can wire any combination except changing the power location.

Chris

Check out some similar questions!

Wiring hunter fan and light /light to 3 way and fan to on off wall switch [ 4 Answers ]

I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...

Fan and light switch wiring [ 2 Answers ]

I am trying to wire a new Hunter 27183 dual sliding switch in my housem to control a fan an light unit. I am wiring the switch with a 14-2 wire coming in with power and a 14-3 wire going out to the fan and light. The switch has four wires coming from the back - Black, Blue, Red and Green. ...

Broan bathroom fan light does not light [ 1 Answers ]

I have a one year old Broan bathroom fan/light in which the light does not work. Replaced the light with a new bulb but still does not work. The fan works fine by switch but the light switch produces no result. What are most likely causes?

Wiring ceiling fan switch and light switch [ 1 Answers ]

I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...

Broan Energy Star Fan Fluorescent Light and night Lite - GFI Trips [ 1 Answers ]

Replaced and existing bathroom fanlight with a new fan/fluorescent light unit. Existing circuit is on GFI breaker. Two switches provide power to unit. Shared neutral from switches to unit. After installing unit fan was fine. Light tripped GFI. Connected circuit to breaker and fan and light were...

View more questions Search

Check out some similar questions!

Add your answer here.