Ask Experts Questions for FREE Help !
Ask
    kline's Avatar
    kline Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 3, 2010, 12:04 PM
    John Deere 318
    When I try to start my 318 all it does is click.
    I took the starter and had it checked was okay.
    Put a new solenoid on didn't help.
    Checked all grounds okay,
    Any Ideas what may be the problem.
    Thanks Kline
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Mar 3, 2010, 01:24 PM

    Common problem with the 318.
    Its getting volts to the starter but not enough to spin the engine.
    Go to your nearst JD dealer and ask for a hard start relay part # AM107421.it will have instructions for several different JDs.pick out yours for the Onan engine and just follow step by step its pretty simple,
    Luck.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

John Deere 318 Lawn tractor ,Mower Blades won't kick in to mow [ 3 Answers ]

:DI have a John Deere 318 been working on for a couple years finally got it going but will not engage the mower blades It used to run good and then it would just shut the blades off. I would let it cool off and start again and it would run the blades for awhile then quit. Now it won't kick in at...

John Deere 318 lawn tractor [ 2 Answers ]

Hi I was wondering how I can get a wiring diagram for a John Deere 318 lawn tractor? I have found everything on the web except the diagram.

John Deere 318 not getting gas [ 3 Answers ]

I have a john deere 318 and I have replaced the fuel pump and clean out the gas tank and put new gas in and I am not getting gas to the carbeurator. It cranks up hwen I put some gas in the carbuerator but only stays running for a few seconds

John Deere 318 [ 1 Answers ]

I have a John Deere 318 with an Onan engine. When I try to move the mower it wants to die after the hydrostat safety switch is released. If I "tie" down the safety switch I can drive it, but it dies as I hit the mowing deck. Any hints on what to replace? Thanks, Rod Hite


View more questions Search