Ask Experts Questions for FREE Help !
Ask
    ektajoginder's Avatar
    ektajoginder Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 1, 2010, 11:45 PM
    Right wire for 5hp load 3 phase
    Maximum copper wire gauge for 5hp 3phase
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 2, 2010, 03:38 AM
    Need to know voltage to size the amp draw of this motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 phase load calculation [ 4 Answers ]

How do I calculate the load if kw and voltage is given in a 3 phase application?

Load calculations for three phase [ 0 Answers ]

Hi There -Three phase 240VAC power supply -Full load current is 240amp. 80amp/phase.. Is there any formula to balance the load current on each phase. Please advise. Thanks.

Can 1 phase power 4 air cond? (2 x 1.5hp and 2 x 1hp) [ 2 Answers ]

can 1 phase power 4 air cond? (2 x 1.5hp and 2 x 1hp)

B&S 16.5HP OHV motor runs ruff at full throttle/under a load. [ 4 Answers ]

B&S - 16.5HP OHV motor Model: 31C707 Type: 0154E1 Code: 040408ZD Question, my 16.5HP motor runs fine when idling and at half throttle but, when I put it in full throttle and let the deck down it runs really ruff (under a load). So much so that I have to actually stop and let the mower gain...

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping

View more questions Search