Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
1-bromobutane and yield
[ 1 Answers ]
In the preparation of 1-bromobutane from butanol why is the yield not 100%. Also, why is sodium metabisulfate added in the isolation part.
Cracking Water for Hydrogen Fuel Cell
[ 5 Answers ]
Does anyone have any schematics or parts listing, or know where I could obtain one, for a system to crack water into it's constituent parts? What I would like to do is setup 5 to 8 KW of PV panels. I would then use the energy generated from this to crack water into hydrogen and oxygen. The...
Hydrogen bonding in water vapor
[ 4 Answers ]
Unlike a liquid or solid a gas will always expand to fill its container as best as is possible. However, water is hydrophilic because of its uniquely massive amounts of hydrogen bonds (not so much bonds as powerful associations), does it take this same quality through into its gaseous state? To...
Rate of hydrogen & oxygen mixing at reactor
[ 1 Answers ]
liqued hidrogen &liqued oxygen are mixing at reactor L=75cm ; r=60cm ; the product =0.108kg/sec find the oxygen & hydrogen reaction rate??
Hydrogen sulfide in water - due to water softener?
[ 9 Answers ]
Hi, I've been trying to determine the source of a rotten eggs smell that was coming from our sinks and shower. At first I thought it was coming from the drains, and that it had to do with the septic system and/or plumbing pipes/vents. However, I have since determined that the source is the... View more questions Search
|