 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What typeof water softener pellets should I use
I have a watersoftAS24TP water softener. I had the waer analyzed --It's hard and has .2PPM maganese. Iron level is .3. I think my water is causing undue wear and tear on pipes and other plumbing... I know it makes my hair look gross. Any suggestins would be appreciated. PS I have a well
|
||||
Check out some similar questions!
We have a water softener that has a resin filter that has broken numerous times due to surges in water pressure. This time we didn't realize it had broken in time to bypass the softener and avoid getting resin in the lines again. We've already flushed the resin out of the 2 toilets and 2 sinks...
When we bought our house, it came with a decommissioned water softener in the laundry room. The pipes behind it (I'm assuming in and out) were capped off with plastic plugs that toggle back and forth. If you're familiar with Dr. Dolittle, I'd call it a pushmi-pullyu setup. (sorry, I'm an admin, not...
Since I could not lift bags of salt to fill the container of my water softener, I just unplugged the softener instead of turning off the main valve; therefore, apparently the water continued to flow through the remaining salt until it was gone. In the last year, I have been through two brand new...
Put a bag of salt in my softener today and it appeared to be way over the brine level. Checked on it a few hours later and still had dry pellets on top. Manually regenerated the system - no fill. Letting it go through its cycle now, but wondering if there's something I'm overlooking. There's...
Hi, again I called a well service Co. and they replaced my well pump. It was barely functioning. Strangly the pervious install was a 220 volt pump and it was connected to 110, and it worked. That pump was about 20 years old. The new pump is a 110 volt pump. My problem now is occasional...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
