Ask Experts Questions for FREE Help !
Ask
    arthurwilborn's Avatar
    arthurwilborn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2010, 03:42 PM
    Murry lawnmover wiring diagram
    I have a murray riding lawn mover. It is not firing and want start. We have replaced all safety switches and solieond but when we remove the ground wire from coil pack (magneto) engine will fire with the ingnition switch, but will not turn off with the key. Replaced wire with to the coil pack still no fire to the spark plug and still will not start. Please assist if you can diagnose the problem and send a resolution. Thanks for the immediate attention to this delima!!
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Feb 25, 2010, 07:56 AM

    Uplug the wire going to the coil,run a jumper wire to coil,start engine ,ground jumper wire to engine,if it dies coil okay check key switch with multimeter for omhs to kill wire make sure its working.If it doesn't die replace coil..
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Feb 25, 2010, 08:38 AM

    Hi,
    I would say it is the switch. Easier to go further with a model number.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need transmision belt diagram for murry #40508X92 mower [ 1 Answers ]

I have a Murry 14.5 hp 42 in. cut mower. The model number is 40508X92. I need a daigram for replacing the trasnmisson belt. The area I am having a prblem with is at the tension pulley.

I need a wiring diagram for a older murry mower [ 3 Answers ]

I have replaced the battery , the solenoid , the key switch, the battery cable! Please help.

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

Murry riding mower belt replacement diagram [ 1 Answers ]

where can I find a belt replacement diagram for a 38" cut murry riding mower (11hp,37x63belt size).

Murry riding mower belt diagram [ 1 Answers ]

I have a murry 16 hp, 4 speed, model number 3-39003. I need the diagram for the belt on the mower deck.

View more questions Search