Check out some similar questions!
HoneyWell Themostat wiring
[ 3 Answers ]
Hi, Currently I have a Honeywell analog(mercury) thermostat which I'm trying to replace with Honeywell RTH6300B. When I look at the current mercury stat wiring its lot different. I see a red wire connected to unmarked place. I see a yellow wire connected to something marked as "2" and a white wire...
Honeywell RLV4300 themostat
[ 4 Answers ]
I have bought Honeywell digital RLV4300 Thermostat from Homedepot, and want to replace old analog one. I found there is only 2 wire (both are black) out from RLV4300, but there are 4~5 colored wires from old thermostat. Want to know how to connect the wires. Thank you for help.
Install Honeywell RTH230B, Removing Honeywell Q674L
[ 2 Answers ]
I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...
Honeywell RTH230B themostat / fan
[ 1 Answers ]
The gas forced air FAN comes on the second the Thermostat calls for heating, so cold air blows until the furnace heats up. Not sure if it did this with the mercury switch t'stat (new house to me). Should there be a delay for the fan to allow the furnace to heat up? How do I do that on this...
Honeywell RTH230B themostat
[ 1 Answers ]
I recently bought a Honeywell RTH230B 5-2 programmable thermostat. I seem to have misplaced the manual and therefore am having trouble setting it-- Could someone tell me how to obtain another manual on line for this device? View more questions Search
Add your answer here.
|