Ask Experts Questions for FREE Help !
Ask
    Chlimon's Avatar
    Chlimon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 22, 2010, 06:19 PM
    Dayton thermostat model 2E137
    I am replacing a dayton 2E137 thermostat with a Honywell RTH2310. The Dayton only has two wires attached to R5 and to 4. Where do they do on the Honeywell
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Feb 22, 2010, 06:46 PM

    What are the letters by the terminals on the new thermostat. If you have one that has an Rh connect one wire there. If you have a terminal that has a W put the other wire there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm replacing a white rodgers 1F58-72 model thermostat with a Hunter model 44155C [ 2 Answers ]

There are some different wiring codes that are different how do I do it.

Hunter thermostat model 44260 [ 1 Answers ]

Do you have a way of matching the color of the wires to the thermostat? I have 5 wires coming out of the wall, Green, Red, Blue, White, and Yellow.

Hunter Thermostat Model #47300 [ 5 Answers ]

Hi, I want to install a Hunter Thermostat 47300, however, the instructions call for the existing wiring as a green, red and white. My old wiring is brown, blue and teal colored. I don't want to hook up until I understand the wire coloring. The condo was built in 1972 and I only need to get...

Honeywell thermostat model #t8411r [ 1 Answers ]

Our system controls both the central air and heat in our home (which is a rental). Yesteday I noticed that after I had switched on the heat that the thermostat was no longer working. We have checked all the breakers and examined the circuit board, however, I am still in a quandry if this is a...

View more questions Search