Wiring thermostat 5 wire heat pump t8411r

Check out some similar questions!

Honeywell T8411R Thermostat Wiring [ 3 Answers ]

Someone gave me this digital thermostat which was used & has no instruction papers. I have a Goodman Heating & A/C self contained unit outside for a mobile home. The old thermostat was a 4 wire system with a green wire on the G terminal, red wire on the RC terminal, blue wire on the Y terminal, and...

Thermostat Wiring -- Where to put "O" wire if I have no heat pump [ 1 Answers ]

I'm trying to replace an old Dayton thermostat (Model 2E137) with a newer Honeywell (either the 6300B or the 7400). I have a Bryant 80 furnace in the basement and a Bryant Quantum Plus 550A air con outside. The Dayton thermostat has wires going to six terminals: R, 4, Y, W, G, and O I know...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Wire New Thermostat to old heat pump [ 1 Answers ]

I am trying to install a Hunter model 44860 thermostat. I have already installed one on the my downstairs gas heating/ac unit, and it works well. I am now trying to get the second one to work on my upstairs unit, an old heat pump with emergency strip heat. This heat pump is an Amana, and is...

Wire colors for heat pump thermostat [ 1 Answers ]

While installing a programmable therostat, two of the indentification stickers fell off the wires. The wires colors are blue and brown and I don't want to hook them up wrong. The "ports" are E and C. Any help would greatly be appreciated. Thanks

View more questions Search

Check out some similar questions!

Add your answer here.