Ask Experts Questions for FREE Help !
Ask
    dnrtbowman's Avatar
    dnrtbowman Posts: 6, Reputation: 1
    New Member
     
    #1

    Feb 20, 2010, 06:30 PM
    How to change snowblower attachment on sears 16
    Do I have to take aprt any part of the attachment to get the belt on.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Feb 20, 2010, 07:22 PM

    Model #?; I can lookup a generic belt number probably.

    Yep, most likely. I just changed a sears belt twice.

    My snowblower has belt motion and a chain for the auger. The engine is in the middle of this.

    The engine bolts (slots in frame) tensions the chain for the auger and there is a separate tension mechanism for the belt. For bolts have to be loosened. Tensioned with something like a crowbar and tightened.

    I had to loosen the engine bolts and the belt tensioning bolts. Remove the chain and then the belt.

    Yours may be different. Need the model #. Diagram should be at www.searspartsdirect.com
    dnrtbowman's Avatar
    dnrtbowman Posts: 6, Reputation: 1
    New Member
     
    #3

    Feb 21, 2010, 07:25 AM

    Model number is 917.253725 just need to know if I have to take apart some of the frame to get the belt on
    dnrtbowman's Avatar
    dnrtbowman Posts: 6, Reputation: 1
    New Member
     
    #4

    Feb 21, 2010, 07:27 AM
    It is a 40 inch snow thrower attachment from Sears really old I have the manuals but it doesn't say how to do it.
    dnrtbowman's Avatar
    dnrtbowman Posts: 6, Reputation: 1
    New Member
     
    #5

    Feb 21, 2010, 07:28 AM
    Sorry model # is 842-260621
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #6

    Feb 21, 2010, 10:02 AM

    Diagram is here: http://www.searspartsdirect.com/part...0014439&blt=06
    dnrtbowman's Avatar
    dnrtbowman Posts: 6, Reputation: 1
    New Member
     
    #7

    Feb 22, 2010, 03:53 PM

    This diagram doesn't show me how to change the belts
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #8

    Feb 22, 2010, 05:03 PM

    Can you take a picture of the area.

    Probably item #25 loosens on a slot with 4 bolts. Take a look.

    How easy is it to access this area?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #9

    Feb 23, 2010, 10:08 AM

    Hi,
    Perhaps this would be of some assistance.
    advice on mounting snowblower - MyTractorForum.com - The Friendliest Tractor Forum & Discussion Board and Best Place for Tractor Information on the web!!!
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears Lawn Tractor Attachment Clutch Lever [ 3 Answers ]

Have a Craftsman riding mower model 917.256530. Won't start - due to following I think. Attachment clutch lever which engages and disengages blades is stuck about half way between engaged and disengaged position. I can move it up to the engaged position. I can not move it down to the disengaged...

Have Sears/Haban snowblower attachment. What does it fit? [ 2 Answers ]

I have an older Sears snowblower attachment model 842.260621 My research indicates it was manufactured by Haban Mfg. and that in 2000 rights to some Haban items were sold to Agri-fab but not the snowblower. What models/brands of garden tractor would this fit? It appears to be powered from a...

Sears Craftsman Snowblower Manual [ 3 Answers ]

I am trying to find a owners manula, parts list and repair manual for an older model snowblower but Sears does not recognize the model number Any ideas? It's a 10 hp 256 inch cut Craftsman model 71-52110-1 Thanks

Sears craftsman snowblower trouble shooting no spark [ 5 Answers ]

Have esears snowblower that is not getting any spark. Points are good and I think the plug wire is good and the plug is new. Any ideas

Sears tractor snowblower installtion [ 3 Answers ]

I recently enherited a sears tractor model#917.25930 with a snowblower attachment model#842.260051 but can't find owners manual for putting them together I either need instruction or help find it


View more questions Search