Ask Experts Questions for FREE Help !
Ask
    bloom59er's Avatar
    bloom59er Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2006, 01:37 PM
    60 amp breaker at service panel
    :confused: I have my spa totally wired, using a spa disconnect with gfi. I am now at the end of the line, with 3 #4 thhn coming from disconnect box, and ready to hook up to service panel. I have a 2 pole 60 amp breaker, and I am not sure what wires go where at the breaker panel. I think the red and black connect to the breaker itself, and the white goes to the neutral bar. I have already connected the bare ground wire to the ground bar in the panel. Am I correct or not??
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 26, 2006, 02:07 PM
    Black and red connect to the breaker, the white connects to the neutral bar with all the other whites, the bare connect to the bar with all the other bare or green grounds.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

200 amp panel feeding a 100 amp panel roughly 130' away [ 7 Answers ]

Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek:

Breaker panel [ 1 Answers ]

Can I use a 200 amp box with 100 amp service

200 amp service with a 200 amp outdoor breaker [ 1 Answers ]

I need to know how to wire a 200 amp outdoor breaker enclosure.I have 4/0 scu cable for my service head to the meter,and 4/0 scu from meter to breaker enclosure.Then from the breaker enclosure I have 4/0 ser cable to my panel.What is the proper wiring method in the enclosure,please help.

Why are these tabs on my breaker panel? [ 3 Answers ]

Howdy. I have a quick question. In my circuit breaker panel, about the bottom 1/4 of the rows have little metal tabs on the edges that the top 3/4 do not have. I do remember that the breakers are Cutler-Hammer Type "CH", which have a little hook shape to secure them on the panel. (see link) ...

Question on 100 amp service/panel [ 1 Answers ]

HI, glad to have found this place, I have an electricl question hopefully Ic an find the answer to here... Is there any way to have 150 amp service added to my 100 amp box? (Giving me total capacity of 150 amps) I just replaced my old fed pacific main panel and sub panel w/ cutler hammer...

View more questions Search