Ask Experts Questions for FREE Help !
Ask
    orsonong's Avatar
    orsonong Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2010, 07:46 AM
    Goulds j10s pressure problem
    I have a goulds 1 hp with J10S and since I opened the impeller casing to clean the insides including the impeller I noticed that after re-assembling everything back it does not generate as much pressure and therefore volume vs. before I opened the casing. Is there something I should particularly look for when assembling back to make sure that no compression loss will happen?

    Orson
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 20, 2010, 08:26 AM

    Are you saying that it won't pump up to the cut off pressure in the control box? What pressure did you have before and whar did it drop to? Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure Sensor... the problem? [ 9 Answers ]

Unit's been on the fritz for awhile now. I had an HVAC guy out multiple times for the same problem but always a different result. They replaced the ignitor module, ignitor and control board and it still runs intermittently. Monday I grabbed the harness and gave it a tug an noticed a clicking...

Boiler problem--after topping up pressure [ 2 Answers ]

Hi all The pressure of my boiler dropped because I bled the radiators earlier today. I followed manual instructions to top up the pressure but the boiler still won't come on. Read somewhere that maybe it's because topping up pressure can bring air into the system? Any ideas on how to get...

Another shower low pressure problem [ 3 Answers ]

I have read some of the other low pressure shower issues posted here but none seem quite the same. I don't have a one valve or three valve system. Mine is a two valve shower system... hot and cold. It is a shower, not a tub/shower. My problem is that the hot water pressure is really bad. I...

Gas valve pressure problem [ 1 Answers ]

I had an old Coleman Evcon furnace, the problem is when the flame came out doesn't come strong because the fleame stay right at the nozzle of valve pipe,

Pressure Problem [ 3 Answers ]

We recently moved into a 7 year old house that is on a well. This week we installed a new diswasher and in the process we shut off the hot water by turning the shower valve coming directly out of the hotwater heater. When we turned the valve back on a lot of black/brown gunk flowed out of the...

View more questions Search