 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well, there is only a load wire if the load wire is present in the box. Sometimes the feed is in the box. Sometimes both. One thing that is always present are the travelers. They go on the gold screws and will always come from the same cable. The load or feed goes on the "common" terminal. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
I have 2 bedrooms that I am trying to install new light switches in. They both had dimmer switches in, now I just want regular flip switches. The problem is that Room A seems to want to be a 3-way switch with room B. There are 3 black wires in the electrical box. Right now, with the dimmer...
Hello, I'm unable to find the answer to this question, I'd like to use a 3Way motion sension switch but keep the other switch a normal 3 way. I don't know if it's possible. Thanks for all help, Scott
We are finishing our basement and want to put a switch for shop lights at the bottom of our stairs and one on the outside of two already finished rooms.We are using 12/3 wire and have come to a standstill.All is wired but no power to the receptacles for the shop lights.HELP! What have we done wrong...
View more questions Search
|
