Ask Experts Questions for FREE Help !
Ask
    LOrazio's Avatar
    LOrazio Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 25, 2006, 10:40 AM
    Replacing a bathtub drain
    I am trying to replace a bathtub drain ( or stopper). The old shoe strainer rusted and I can not unscrew it to remove it. What else can I do?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Nov 25, 2006, 12:32 PM
    Hey Loranzio,

    Before I can help I have to know what I'm dealing with. I'm putting up some tub stoppers. Is yours among them or do you have a lever on the overflow plate that pops up the stopper? Regards, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing basement shower with bathtub.. [ 13 Answers ]

Hi guys. So, I need to replace a basement shower with a bathtub. I replaced tubs before, not that hard. However, I've never quite done this, and I'm concerned about the drain. Obviously, I'd like to move it a bit, maybe a foot or so. How hard is it to adapt what's there to a bathtub drain. ...

Bathtub drain [ 5 Answers ]

I need to know what the part is called that has a lever and opens and closes the drain in the tub. I just moved in to an apartment and discovered that my tub doesn't have this so I can't take a bath only a shower. I want to know the right part to request they put back in the tub so they don't bring...

Bathtub drain [ 1 Answers ]

I cleaned a pair of boots off in the tub. Debris went down the drain from off the boots and I think that this may be part of the problem I am experiencing. Every time I take a bath or shower and the water goes down the drain, it comes out in the basement from under the stairs. This happened twice....

Bathtub drain [ 1 Answers ]

Anyone care to share their preference for the lever type bathtub drain vs the lift and turn type. I have always had the lever type stopper but I don't think they have worked real well after they get a little age on them.

Replacing bathtub and shower fixtures [ 4 Answers ]

(1) When replacing bathtub "snout", shower controls etc.. Do you caulk around the fixtures or use plumbers puddy? The original installation had plumbers puddy. (2) Do you place the caulk so the fixtures "sqeeze" out some material or just inside the fixtures? Example: I've obtain some...


View more questions Search