 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I want to replace my Bryant P271-3457 with a LUX TX9000TS thermostat.
Current configured Bryant P271-3457 heat pump thermostat is 7 wires labelled as follows, Y, G, R, O, W2 (B handwritten over the W2), E and C. The LUX thermostat has the following options: W, Y, G, B, O, RC, RH and C.
I can create jumpers if necessary but just don't want to damage my heating/cooling system by trying things. Thanks! |
||||
Check out some similar questions!
I have a Lux 9000TS Thermostat - I don't know anything about heating and electric my house was built in 2002 so everything is relatively new I swapped out my old stat when the AC quit working in September - Today the first day in NE Florida I've had to use the heat I found out the heating is not...
I have a 8 wire bryant thermostat model p271-3457 that I want to convert to a hunter model 42995b but it only has a five wire diagram
I have an American Standard Heat Pump with electric heat strips, I want to change the digital thermostat to a Lux programmable TX 9000ts. The american standard thermostat wiring is as follows R- red wire W2- jumper with a brown wire W1-jumper with a white wire Y- yellow wire G- green wire O-...
Please help. I have an old thermostat and know nothing about it but wanted to put the new Lux TX9000TS in for programming my heating and cooling. MY old bryant lr11746 thermo is hooked up with G1, R, O, C, E, W2, and a Y. Is there anybody that could help me figure this out as to what needs to go...
I would like to change from an Aprilaire 8346 Digital t-stat to a LUX TX9000TS but am having a bit a trouble determining whether they're compatible. The Aprilaire wiring scheme is as follows: C W2 R G Y O/B where in this application the O/B is an O. What wires (if possible) would go to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
