Ask Experts Questions for FREE Help !
Ask
    drewammons's Avatar
    drewammons Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2010, 06:53 PM
    Filter size.
    My new Goodman GMVC91155DX Furnace is about to be installed. I need to know what size filter to by. Spec sheet says it takes a 486.. I have never seen filter sized like this?

    Can anyone help me covert the size to something I can buy?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Feb 14, 2010, 07:19 PM

    Once the furnace is installed there is usually a filter grill installed on the return portion of ductwork near the furnace, so you will just need to measure this opening and go buy a filter that size. If you plan to use an internal filter(not recommended beause its just to easy to forget about it) the installer should be able to tell you what size filter you need and show you how to place it correctly. Hope this helps.

    PS. I believe the 486 may be just a part number
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chronotherm I've plus honeywell filter size [ 0 Answers ]

I have replaced the batteries in my thermosat and the filter in the furnace and now my pilot light has gone out. I followed the directions on the panel and tried to reset it however, nothing is happening. How do I reset my pilot light? Also, I need to find a company to clean my vents... any...

Wesco Furnace filter size [ 0 Answers ]

What size filter is used for a WESCO model 30 UEM 1?

I can't find the right air filter size anywhere [ 8 Answers ]

I just moved into a house and it has 2 electric heat pumps and 2 air movers - I guess that's what they are. I assumed they were backup furnaces, but I don't really understand after looking at the manual http://www.tappan.net/Literature/514b.pdf This is my first time having heat pumps in a house....

True filter size [ 1 Answers ]

I have a intertherm furnace model#mmha-056aahr-05,I got the same size filters to replace the old,but man they are tight,they seem to be to large.The old are bent and sqished.the size I have are 15x20x1.Can anyone help with the proper size.Do they make a 14x19x3/4.. Thanks:confused:

Filter size [ 1 Answers ]

What is the recommended size of filter system is needed for a 24' round above ground pool?

View more questions Search