Ask Experts Questions for FREE Help !
Ask
    dallas682's Avatar
    dallas682 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2010, 08:09 AM
    Bryant 697c fan stays on all the time
    The fan in my out side unit stays running after it is turned off. What could cause this on a bryant 697c
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Feb 14, 2010, 10:22 AM

    Does the compressor continue to run as well? If so, the contactor is likely stuck in the engaged position.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 697c fan motor grinding do I have to replace or can I fix myself [ 1 Answers ]

I have a bryant 697c the fan motor on the outside is making a grinding noise but the fan still turns. Can I fix it or do I need to replace it

Bryant Gas Heater Needs Rebooting time to time [ 6 Answers ]

I have a Bryant gas heater I had installed in 1991. It is a model 394 and the model number is 394GAZ203675. From time to time the heater stops coming on and of course I don't notice it until I start to get cold. As soon as I turn off the furnace and turn it back on it immediately starts up and...

Bryant 394GAD024050 - Fan runs all the time in AC Mode [ 6 Answers ]

Hi, Thanks for taking your time to read this post. A while back I asked the question about disconnecting the Heating part of the unit and if I could get the AC to run correctly without it being hooked up. I thought I had the answer but apparently I'm still doing something Incorrect. I...

Central air stays on all the time, even after inside fan turns off. [ 1 Answers ]

I have an old Tempstar A/C unit that stays on after the blower turns off. I replaced the thermostat in the winter and it works fine with the heater (tuns on & off correctly). I removed the new thermostat from the system & the A/C unit still stays on. The only way I can get it to turn off is to...

Heat won't come on and blower stays on all the time. [ 1 Answers ]

I have a problem with a furnace that the heater won't come on, "not at all", and the Blower it stays running all the time, can't turn it off unless disconnected. Before replacing the Circuit Board, I will appreciate if somebody tells me what other reasons are there that may cause this problem. ...

View more questions Search