Ask Experts Questions for FREE Help !
Ask
    Rick in CT's Avatar
    Rick in CT Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2010, 07:15 AM
    Finding obolete snowlower parts (# 581645-854 and #318532-854)
    The augeres in my F2484-020 snowblower were shattered and I can't find replacement parts. The blower is no longer made. Any sugegstions of a place to fine used or salvaged parts? The motor and everything else is fine, so I hade to junk the blower.

    If I can't find the parts, any suggestions on how to get some cash for the blower rather than junk it?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Feb 14, 2010, 08:22 AM

    Hi,
    You may be able to get a machine for spare parts on craigslist or eBay. I looked several places including a US/Canadian clearing house for surplus/obsolete parts. None were found. The last three digits are the paint code (color) and some places did not allow searches with it and some required it. At any rate it was eventually replaced by "E701" at the end of the first six digits for both numbers meaning it was available in black only.
    Good luck.
    Peace,
    Clarke
    PS They are only the kind of part a distributor was liable to stock.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Finding older parts for Trane gas furnace? [ 8 Answers ]

I'm currently looking for an in-line fusible link for an older Trane forced-air gas furnace. I've tried quite a number of places so far with no luck. One place I contacted said they could get it but wanted over $90 with shipping (absurd). Does anyone have experience with a good supplier of...

Snowlower will not engage [ 0 Answers ]

I purchesed a used lawn tracter mtd12/36 with a separate snowblower. I dropped the mower deck,have connected everything for the blower. It ran well. I shut it off,lowered the blade engagement lever one more time to check it before I put it away, the snowblower wouldn't engage.the lawn tracter is...

Looking for parts [ 5 Answers ]

I've been looking for a fan motor for my dads direct vent wall gas furnace. I can't seem to find one with the same specs the motor has. It is a sears furnace but they said it is no longer available. The name on the motor is universal electric co. it is 115v 60 hz 2.4A 1100/950 rpm 1/20 hp 1/2 dia...

View more questions Search