 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs engine problem
Hi
I have an 11hp briggs and stratton lawn mower engine and I did a lot of major reparations on it. But I noticed that the intake valve was longer than the exhaust one. A few 0.something milimeters... so I tried to file it and now it's too short... All these explanation to come around the biggest problem. When I pull the crank, there's smoke coming out of the carb... Could someone help me please? |
||||
Check out some similar questions!
Hello people do anyone know the stem clearance of valve on a 14.5 briggs engine. Model 287707 thanks grrtwo
I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...
I have a briggs 23hp on my mower. Many times when I try to start,it tries but doesn't. If I turn engine bach 1/4 turn by had at fan cover it starts fine. The battery is new and fully charged. What could cause this? Thanks
I have a 12 HP briggs and stratton engine that will start when choked and then only run while between choke and full throttle position. I have cleaned carb. And checked fuel supply. Any Suggestions?
After rebuilding the deck over the last two months, now my Yard Machine 600 series tractor will not run properly. The engine will rev and die repeatedly when you try to cut with it. The carb was rebuilt last year and it has new fuel lines and filter. Is this an adjustment problem or is the carb...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
