 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honda hs35 pull start problems
I have just bought a used hs35. After 2 weeks, the pull start is very loose, still recoiling but not engaging the engine... is this an easy fix? [email protected] thanks!!
|
||||
|
||||
|
Hi, Looking at the manual at: http://www.hondapowerequipment.com/p...s/31730050.pdf It appears to be buried beneath lots of shrouds. It is a G150 engine. The manual is is not available in the US, but is in Europe at: http://www.honda-engines-eu.com/en/images/1004.pdf Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The starter cord came out after a couple pulls. It used to work great. Since the cord not broke there is sufficient cord to use the same cord. I have it all apart and see the spring tightens when I turn it toward the front of the machine. Where do I install the cord and how exactly does it get...
I recently bought a used Honda HS35. The first two times I used it, it started fine. After the last use the engine start switch was accidentally left in the on position for about a week. Since then I have not been able to start the engine... it doesn't even try to start. Checked the plug and it is...
I have a Honda HS35 snow blower that won't throw snow. The rubber blades are a bit worn but I would think it should throw something. The machine also operates at a fairly low rpm and when I raise the rpm it will throw snow but just enough to get past the discharge chute. I want to buy new...
My Honda HS35 4 Stroke Snowblower won't work, it'll almost start, but won't. Have any ideas? Please help!! :(
Hi There; My hubby just picked up (literally) a decent looking blower. All of ours previously have been attached to tractors. I was wondering if anyone out there might have a manual they were no longer using or an unwanted spare manual to assist. He's good, but sometimes gets frustrated with...
View more questions Search
|
