Ask Experts Questions for FREE Help !
Ask
    allisonotr's Avatar
    allisonotr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2006, 06:36 AM
    What does this mean?? kenmore elite
    I have a kenmore elite that is flashing 2 error codes - "dL" then "F"- We have moved and lost the manual- Does anyone have an idea of what this means or what we do about this message? Thank you! Allison
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Nov 25, 2006, 09:07 AM
    Just taking a stab here, different codes on different dishwashers have different meanings.

    "dL" sounds like it may mean "de lime". A common diagnostic on commercial machines. In fact, the undercounter commercial machines can be set to nag you about deliming after so many cycles.

    You can also try calling kenmore and speaking with their tech support to see what the code means.
    RichardBondMan's Avatar
    RichardBondMan Posts: 832, Reputation: 66
    Senior Member
    		  
    #3

    Nov 25, 2006, 05:31 PM
    Mind giving me the model number, it's on the door or the door frame I believe then I will see if I can find an answer for you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Help kenmore elite fills and then... [ 1 Answers ]

I have a kenmore elite washer,about 3-5 yrs old,it will fill with water and then it wount do anything,but u can hear the timer click

Kenmore elite fridge [ 1 Answers ]

We had a power outage at our neighborhood. Now the freezer/fridge is warm, but lights are on. Is there something I can do to fix it?:eek:

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search