Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to mount a wall mount pot filler
[ 3 Answers ]
I was thinking about installing a wall mounted pot filler in our kitchen. What type of fitting and mounting does this require. I am using ½” copper to a thread male. I will secure the pipe to the stud. Is this correct. How far out does the thread need to stick out of the wall.
Wall mount a/c circuit
[ 2 Answers ]
Would the following set-up work: 30AMP double-pole breaker in panel, 12-2 NM to single 30AMP 220V receptacle, black and white hot ,with white wire marked with black tape? Ran wire anticipating 110v a/c, lady with the checkbook( my wife) thinks that we will end up with 220V unit. I f that's the case...
Wall Mount toilet relocation
[ 7 Answers ]
I have a wall mounted toilet that I would like to relocate, it will be on the same wall, just on the opposite end of the room. Any suggestions on how to do this? House was built in 1970 and bath is main bath on 2nd floor.
Gas Wall Mount heater
[ 1 Answers ]
I have a Williams wall mount heater model #5009622. My problem is I do not know if it wired up correctly. I looked at an owners manual online and it showed a diagram of a control valve having three electrical posts. Mine has four. What I need to know is where all the components connect to the... View more questions Search
|