 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Removing price pflister shower control valve
THE CENTER of the PRICE PFISTER SHOWER CONTROL came out but the BODY remains STUCK inside, Tried prying and pulling but no luck. What to use to remove??
I suspect the Orings are frozen in the housing. OPEN TOO SUGGESTIONS Dennis |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I can't control temperature in my price pfister shower. It is a single handle simply turn on model. It is always too hot and will only mix with the cold on occasion. Do I need a new valve or can it be saved otherwise?
My price Pfister bath/shower valve has a slight leak. I can't find any identifying model numbers on it. It is at least 30 years old. How do I determine replacement parts before I take the valve apart to replace the washers or the entire valve?
I was trying to replace a leaky valve in a price Pfister shower control knob but can't figure out how to remove the old valve. Is there a special tool for this? Thanks
Help, my Price Pfister shower pressure balance valve leaks up through the shower head when turned off. I replaced the cartridge and it still leaks. It almost stops leaking right after a shower, but over a couple hours it drips about once every second. If I turn on another faucet in the house...
Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...
View more questions Search
|
