 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Keeprite SP 80 High Efficiency model # NUG5075BFB2 the pilot is lit but the furnace won't fire the thermostat( new batteries) is set for 70. The filter is clean, I tried turning everything off including the gas and the thermostat then turned everything back on the pilot is on but the...
I have a gas furnace... when I will hear a clicking sound when the furnace is ready to fire up but it doesn't I see the pilot light go on but the blower does not not go on either... on the auto setting... On the fan on setting the blower fan will go on,, the burner clicks but will not fire...
I have a Amana Air Command 80 Model GHI. I heard the vent blower motor start up but no follow-up ignitor action. The ignitor was found to have a crack in it. The furnace never did shut itself off. Suggestions would be appreciated.
I took the cover off and noticed the red light was blinking 2 times is there any way I can fix this myself or do I need to call someone
I have a comfortmaker GNJ075n12a1 80% furnace installed in 96 the igniter come on and the blower comes on and the system cycles a couple of times before the control locksout on during this time the gas valve is not energizing to fire the furnace if you shut the system down for a couple of...
View more questions Search
|
