 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm installing a 100 amp service in the backyard with a separate meter on a pole next to sub-suface power tranasformer. I have a 100 amp meter box on one side of the pole and a 100 amp braker panel with a 100 amp main breaker on the other side. I'm going to place in it a 15-20 amp breaker for gfi...
I have a Hampton Bay track lighting system in my dining room and need to replace a couple of bulbs that have gone out. How does the fixture come apart to replace the bulb? The globe is shaped like an inverted champagne flute and it has a frosted cover inside covering the halogen bulb, but the flute...
I replaced an outdoor outlet controlled by an interior switch with a Cooper gfci outlet and it tested fine. Then I replaced the existing switch with a Cooper switch with pilot light. The switch has one line coming into it with one white(hot), one black(neutral), and one ground. When I connect...
Why is it necessary to use large gauge, 24, 26 for phone wire? Could not one use 12 gauge. Is there a reason for using fine wire for phone or other devices with low voltage? Or is is it because it takes less room? Thank you
Hello, I have a fairly new home I purchased. I am changing my outlets as I am painting the rooms (Laundry Room) and noticed that the previous home owner put in a laundry board (built in) and wired to the nearest outlet on the wall. They used 12 gauge wire to the outlet (from the built in iron...
View more questions Search
|
