 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan stays on furnace flames shut off cold air comes out
Can someone help me quick will really apriciate it I'm working on a crown gas furnace every time I call for heat evrything works perfect but before the room gets warm the heat shuts off an the fan keeps running an blows out cold air I figured t could be a switch so I tested the pressure switch an it looks like it is it but if I replace it an it doesn't work what could be the other problem
|
||||
Check out some similar questions!
Thanks for taking a moment to read - I've reviewed a lot of posts, however still cannot find one that explains why my Interthem G5RC100-16 gas furnace blower will not shut off even after the thermostat has been shut off. I'd also like some help, please, finding the "codes" for the blinking light...
I am hoping someone can help we have a Tempstar NUGK059 Gas Furnace - the pilot does not light and the furnace blower runs but only blows cold air. We thought it was the old thermostat - replaced the thermostat - double checked wiring. Same problem. Help it is -7 here in the Midwest. After...
My electric forced air colman furnace does heat and all, but the blower or fan will not shut off. It go continually. I even shut the furance off but the blower srill continued to blow air. What can be the problem?
My electric forced air colman furnace does heat and all, but the blower or fan will not shut off. It go continually. I even shut the furance off but the blower srill continued to blow air. What can be the problem?
Goodman GMPO75-3 ser9911605881 . When warmed up runs OK . Cold the DI fan runs then HSI glows,gas valve opens and it lights with woof woof and goes out in 5 secs . Cycles again and it might start or go on third try. I polished the fire rod, set GV to 3.5 ins then changed GV. 24 volts at the GV...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
