 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Armstrong 90 blower comes on right away and no heat
I have an Armstrong 90SX. As soon as you turn on the power the blower comes on but the ignition never lights. I had this problem a couple of years ago and the service guy crossed some wires in the back on a brown button like thing with two terminals on it. It then did it's cycle and lit. I tried that and it still does not light.
|
||||
Check out some similar questions!
I recently experienced a series of small explosions while my furnace was operating. After extensive troubleshooting, I discovered the rollout switch was tripped, after I reset it, I watched the furnace startup properly, but as soon as the blower came on, it had extensive blowback tripping the...
The inside blower unit won't turn off on my armstrong heat pump
I've got an Armstrong direct vent forced air cooling unit and my blower motor is shot. Is there an easy way to get it out, its stuck behind the cooling coils and it looks like the only way to get that out of the way is to cut the refridgerant lines. Please help
I was just informed by my HVAC guy that my 10 yr old Armstrong Ultra SX90 furnace has popped a rivet on the heat exchanger. He says he is seeing this more regularly with these furnaces. He said he can replace the heat exchanger and told me to think about replacing the whole furnace because in the...
Hello, I am having trouble with my RTH230B Honeywell. I have a Gas furnace and an outdoor ac unit hooked up to a blower and the blower has a heat off cool setting on a switch on it. Our when set on heat everything works as it should. BUT as soon as I turn the blower to cool it turns on and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
