Ask Experts Questions for FREE Help !
Ask
    candy2025's Avatar
    candy2025 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 7, 2010, 03:31 PM
    My mower is 17.5 hp ineed to know how to set the
    I need to know how to set the "gap" between the flywheel and the magneator (17.5hp)
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Feb 7, 2010, 04:14 PM

    Hi,
    It can be done deceptively easily with a business or index card. Turn the magnets away from the armature (the Briggs term for the ignition) and loosen the bolts holding it just a bit (just enough to move.) Place the card between the flywheel and the legs of the armature and carefully rotate the flywheel until the magnets pull both legs toward it. Tighten the bolts snugly and rotate the magnets away to remove the card. Rotate to make sure nothing touches.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I am trying to instal a prototype for myself, but Ineed a hand [ 1 Answers ]

How many BTU I need to heat my swimming pool of 12'x20'x6' from 65F to 70F.. How many Kwh would it take with my electric heater..

Ineed an ID [ 2 Answers ]

Can you renew a ga id if you got a warrant

Can't set valves on mower [ 1 Answers ]

I have a kawasaki john deere 185 18 horse motor and I can't seem to set the valves the way they should be set... can you help me please?

View more questions Search