 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Circuit breaker tripped but vacuum will not turn on
The Circuit breaker tripped when I was using my band saw in my garage. My sander, miter saw and vacuum were plugged in but not in use. After I tripped the circuit breaker, I was able to use my miter saw and sander but the vacuum would not work. I tried plugging into another socket but my vacuum will not turn on. Do you have any suggestion on how to fix my vacuum? Thanks.
|
||||
Check out some similar questions!
I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker
Good day, We have a vacuum circuit breaker (1200A, 15KV, manufactured by Siemens) which feedd power to 13750HP motor. We had three similar incidents on the same 13.8KV substation on these breakers since it was commissioned on 1994. The last incident occurred on Feb. 1st, 2010 when a technician was...
I have a Bryant gas furnace that is 12 years old. I've replaced the filter, thermostat (last year) and the HSI about 2 or 3 years ago. The HSI doesn't have a crack and did recently file it once our problem first started. Our problem has been going on for about 3 years now when it gets cold...
I want to know complete detail of Vacuum Circuit Breaker.
Had a nasty storm and lost power a couple of times. My refrigerator and microwave are on one plug and they did not have power. Checked the circuit breaker and the switch was off. When I flip it back on, it immediately turns itself back off. A few sparks fly sometime. Do I have a blown fuse and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
