 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York stellar furnace ran fine now locked out on reverse poliarity code
The inducer motor was running but now flame reset control board furnace fired up about 5 times then locked out on reverse poliarity code yellow flashing checked high voltage poliarity coming into the furnace was fine but having intermiten problems any suggestions
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 19 year old York Stellar furnace. Model P1UCD12N04601B 57,000 btu's. This unit was salvaged from a military housing complex that closed in 1990. The unit shows very little wear. All the parts look new. The unit sat no operational for nearly 16 years. I removed the unit from the house...
York Stellar furnace model M3UF032SA. About 18 years old I am investigating the blue box that sits on the floor next to my York Furnace. I hear it cycle on and off, but I must admit I'm clueless about what it does. Water seems to have collected under the box, so I'm wondering what sort of...
I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...
I have a york stellar ac& heating system (m3cfo32aa) and I would like to know where the filter is and how to replace it, I have no maunal thank you.
I have a York Stellar Plus gas furnace and during this year's furnace inspection, the Reliance Home Comfort Technician discovered that the collector box cover was cracked. Reliance has not been able to source the replacement part so I thought I'd try the Internet as their only solution was to...
View more questions Search
|
