Ask Experts Questions for FREE Help !
Ask
    damdash's Avatar
    damdash Posts: 79, Reputation: 1
    Junior Member
    		  
    #1

    Feb 5, 2010, 08:08 PM
    Yukon p0446
    If the manifold somehow has a gap of air that leaks through from maybe an improper install, can this cause the code.
    biff26's Avatar
    biff26 Posts: 28, Reputation: 4
    New Member
    		  
    #2

    Feb 11, 2010, 09:43 PM

    P0446 is A vent valve code (located near gas tank/charcoal cannister). If intake plenum was recently removed and reinstalled you may want to check the line going to the purge valve (located on intake plenum). This code sets basically when pcm commands vent on and purge valve to open and the fuel tank pressure sensor sees no change. This can be due to A large leak (gas cap off,line disconnected/broken,faulty gas tank pressure sensor,or vent valve failure(this is A common failure if vehicle is driven in A dirty/dusty enviroment).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

03 gmc yukon XL 5.3 [ 1 Answers ]

I have a 03 yukon xl with a 5.3, went the check engine light first came on the code was p0171 and p0174. I changed both of the pre o2 sensors, the check engine light went out and came back on after a week with a code of p0171. Changed the fuel filter, mass airflow sensor, air filter and add...

Code P0446 [ 2 Answers ]

I have a 1999 Nissan Sentra with a 1.6 Liter engine and automatic transmission. The check engine light is on and the code is P0446, Evap Emission Control System Vent Circuit Malfunction. I checked my Haynes manual, but there is nothing in the book about this code. Is there a electrically...

99 yukon denali [ 2 Answers ]

Just filled up with fuel and when returned home the vehicle would crank but not start-like fuel not getting into system; has a new battery and recently serviced:mad: Just filled up with fuel and when returned home the vehicle would crank but not start 2 hrs later-has been cold, now have the...

View more questions Search