Ask Experts Questions for FREE Help !
Ask
    pops1's Avatar
    pops1 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 3, 2010, 08:07 AM
    Surage arresters
    What are surage arresters not surge arresters
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #2

    Feb 3, 2010, 08:48 AM

    Are you sure it is spelled correctly ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Feb 3, 2010, 09:12 AM
    Quote Originally Posted by pops1 View Post
    what are surage arresters not surge arresters
    Please repost the question. Are you referring to air chambers on your water system or a back up out of the washer stand pipe? Back to you, Tom
    pops1's Avatar
    pops1 Posts: 2, Reputation: 1
    New Member
     
    #4

    Feb 4, 2010, 03:22 AM
    Surage arresters on water pipes on boosted system thanks pops
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #5

    Feb 4, 2010, 06:42 AM

    Another name for "surge arresters" are "air chambers". They prevent water hammer. "Water hammer" happens when you abruptly shut off the water. You have at least 40 pounds of pressure pushing the water flow. The weight of the water hitting a 90 degree bend causes the sound that you hear. We put in air chambers to cushion the hammer much like the shocks on your car.
    Back in the 60's we were required to to put air chambers on all bath lavatories and kitchen sinks. Over time water and condensate built up in them and they must be recharged. First turn off the house at the main house shut off valve. Then open hot and cold faucets at the farthest bathroom to prevent air lock.(This is important.) You will find under each fixture little brass or chrome valves. These are called angle stops. With a small pail held under the angle stop to catch the run off look under the handle of the stop and you will see a nut with the stem running through it. This is called the bonnet packing nut. Put your wrench on it and back it off counterclockwise. Now open the stop and remove the stem and washer assembly, The stop will began to drain. When it has quit draining reassemble the stop and move on to the next one. Do this on each one of your angle stops. There will be six of them in a two bath home. When you are done, close off the faucets you have opened, turn on the water to the house, and give yourself a pat on the back.
    You have just recharged your air chambers and saved yourself a hefty service call bill. Hope this helps you out and thank you for rating my reply. TOM
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #6

    Feb 4, 2010, 10:23 AM

    SB, if a person can drain the entire plumbing system, would that accomplish the same thing? I realize many houses can't do that. Just curious.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #7

    Feb 4, 2010, 01:41 PM

    Maybe, just depends where the chambers are located.

    Say, you have a basement, but the main air chamber is at the meter, probably 40' away from the nearest valve. The one just above for the outdoor hose bib doesn't count.

    You can't recharge that one unless the small drains are removed at the main shutoff.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thoughts on installing water hammer arresters [ 7 Answers ]

What is the modern thinking on the necessity of installing water hammer arresters or air cushions in new plumbing for a bathroom and/or kitchen? What is the method for placing them, 1 at each valve or one at the entrance (hot and cold) to cover the whole house? How are they installed as far as how...

Water hammering, water arresters, big pipe flowing into small pipe [ 2 Answers ]

Hi, I have a water hammer (I'm guessing) problem in our house. All the pipes are under the house and it is a timber house so each time there is a water hammer noise it is extremely noisy. Basically any tap in the house is making the noise when turning on or off quickly with loud bangs. Cold...

Do I need to add air tubes or air hammer arresters on sink and toilet copper plumbing [ 12 Answers ]

I noticed in some houses being built nearby that where they stubbed the copper pipe out for the sink they also ran a stub up about a foot and put a cap on it. I'm assuming it's to prevent water hammer or something. Do I need to do the same thing for my copper in my finished basement or can I just...


View more questions Search