Ask Experts Questions for FREE Help !
Ask
    lewisP's Avatar
    lewisP Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 1, 2010, 05:00 PM
    Whirlpool dishwasher dead.
    Whirlpool dishwasher DU1055XTSB3 dead. Power to unit, power to control board and thermal fuse good. Is the control board bad?

Check out some similar questions!

Dishwasher is dead [ 2 Answers ]

There was, apparently, a power outage yesterday evening while we were out because all the clocks had reset by a couple of hours. That was the only evidence until I tried to start the dishwasher. It doesn't respond at all. I have checked the circuit breaker and have tried various combinations...

Kenmore Dishwasher Dead [ 3 Answers ]

I have a Kenmore Ultra Wash Dishwasher MOdel 665.1359 that has been working well for several years. Today it just stopped responding. None of the lights on the control panel are working. I checked the house electrical panel and the fuse is not blown or tripped. I held the lock key down for four...

Dead Whirlpool condenser fan [ 3 Answers ]

I have Whirlpool side-by-side with through-the-door ice and water that has a dead condenser fan (well that's what I think it is - the fan at the back bottom of the unit behind the cardboard grill). It is a white plastic Panasonic motor driving the fan - looks like a dodgy design in terms of heat...

Whirlpool Gold Dead Won't Start [ 1 Answers ]

Hi... I have a Whirlpool Gold electric dryer, model # GEQ 9858JQO that won't start. Last week the dryer sparked and a little smoke came out of the panel where the controls are and it was dead. I have replaced the dryer plug and when I opened the back there is no evidence of a short. No black...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.